Powerspark Electronic Ignition Kit for Lucas 22D6, 25D6 6 Cylinder. K1-Powerspark

Powerspark Electronic Ignition Kit for Lucas 22D6, 25D6  6 Cylinder.   K1-Powerspark

Powerspark Electronic Ignition Kit (Negative Earth) for Lucas 22D6 & 25D6 Distributor  (PSP15)

This electronic kit is designed to replace the points and condenser inside a Lucas 22D6 or 25D6 distributor, giving you electronic ignition at the turn of your key.

The Lucas 22D6 or 25D6 and Distributor was fitted to to a wide variety of 6 cylinder vehicles including Aston Martin, Austin Healey, Jaguar, Land Rover, MG, Triumph, TVR and many more.

Fitment Guide for our K1 Ignition Kit:

ACAC Ace1963
AUSTIN HEALEYHEALEY 30001963-1968
Austin Princess R Vanden Plas1966 onwards 
Daimler Jaguar420 - 420G1963-1970
FORDZephyr /Zodiac1958-66
FORDZephyr 6/ Zodiac1966-1968
JaguarXJ1968-1973
JAGUAR240/3401968-1969
JAGUARXJ6 2.81968-1973
JAGUARXJ6 4.21968-1975
Land Rover88/1091966-1980
LAND ROVERLAND ROVER Series II/III1964-1980
LAND ROVERLAND ROVER Series II/III 
MarcosMantis1971-1972
MGMGBAll Years
MGMGCAll Years
MGMGC1967-1969
MGMGC GT1967-1969
RELIANTSabre 61964-1966
RELIANTScimitar1964-1968
RoverP51958-1967
TRIUMPHTR51967-1968
TRIUMPHTR61969-1975
TRIUMPHGT61966-1975
TRIUMPHVitesse1962-1967
TRIUMPHVitesse1967-1971
TRIUMPH2000 MKI/MKII1967-1973
Triumph2.5 PI1968-1975
Triumph20001968-1975
Triumph20001972-1977
TriumphGT61966-1973
TriumphTR61969-1976
TriumphTR51967-1968
TriumphVitesse1962-1975
TVR25001972-1977
WOLSELEY 6 cylLucas25D6
Zephyr /Zodiac1958-66 


Benefits:

- Easy to install
- Replaces troublesome points and condenser
- No visible difference in your engine bay
- Improved starting
- Improved performance
- Improved durability
- Maintenance free

Requirements:

- To be used with a coil resistance above 1.5 ohms only
 MUST be used with silicone HT leads, NOT COPPER. Click here to browse our range of HT leads.

Powerspark Electronic Ignition explained in more detail:

The kit uses a simple magnetic trigger and optimises dwell to provide a reliable and consistent spark across the rev range. It is easy to install and maintenance free.

Each kit comprises a baseplate with electronic module, trigger ring and all wiring. The new electronic baseplate mounts exactly where the points and condenser baseplate sat. The kit connects directly to the coil using the wires provided, red to the positive side and black to the negative side. The ignition kit will automatically shut down if the ignition is left switched on without the engine running to prevent component damage.

Powerspark Electronic Ignition Kits are designed to work with a coil resistance above 1.5 ohms, typically 3.0 ohms. Some performance coils operate at a lower resistance and will need the High Energy electronic ignition kit.

Full fitting instructions are included with your kit, and plenty more instructions can be found on our blog.

Watch our 'how to fit electronic ignition' video here:


Write a review

Note: HTML is not translated!
    Bad           Good
  • Views: 861
  • Product Code: K1-Powerspark
  • Availability: 8
21 Product(s) Sold
  • $99.73
  • Ex Tax: $86.72